PRO Wave Corner Burner 123 X 68 cm

• Products can be delivered earlier, unless out of stock and need to be produced.

A modern insert burner for a built-in corner fireplace with a characteristic, innovative wave-shaped WAVE fire line produced by Wild Flame, which makes the flame more dynamic and spatial. The bio ethanol burner insert for the built-in fireplace is made of high-quality 1.5 mm thick steel, powder-coated with a heat-resistant black semi-matt lacquer. The insert cover consists of two parts - it is a precisely laser-cut element made of sheet steel with a thickness of 5 mm, also protected with the same heat-resistant paint as the frame. Thanks to this, the part that heats up the most from fire is protected from any deformations and completely retains its original shape. The perfect fit of the edge of the cover guarantees precise regulation of the size of the flames and quick and easy extinguishing.

It is recommended to install the burner only in material that can withstand higher temperatures, the upper part of the burner housing can heat up to about 80 degrees. When using plasterboard, we recommend only the fire-resistant version.

Technical Data

Dimensions: 1230 x 920 x 160 x 73 mm adjustable (Possibility to adjust dimensions)
Fuel: Bio-ethanol 96%
Heat output: 16 kW
Burning time: 4 to 6 hours
Capacity: 8 liters
Weight: 32 kg
Warranty: 2 years

FREE SHIPPING: DELIVERY TIME ON REQUEST

Please note: Let the burner burn out completely the first 3 times and ensure continuous ventilation.
If the burner gets too hot, it may get too much oxygen in the wool, which can cause the flames to persist. When you close the flame regulator, do this gradually. Slide it closed a little, wait 2 minutes, then close it further and wait another 2 minutes. If the burner still burns, blow lightly and the flames will go out. Our advice is to let the burner burn out completely until the bioethanol is used up in the burner. After switching off, do not pour again until it has cooled down, at least 30 minutes.